Fix links and project names.

Also replaces some backticks by quotation marks to make the README
easier to read.

README.md

-# [Webschleuder](https://git.codecoop.org/schleuder/webschleuder3) on `docker`
+# [schleuder-web](https://0xacab.org/schleuder/schleuder-web) on docker
 
-This repo contains `docker` configuration for `schleuder-web`, a web interface for an encrypted group email system `schleuder`.
+This repo contains a docker configuration for "schleuder-web", a web interface for an encrypted group email system "schleuder".
 
 See:
 
-* https://git.codecoop.org/schleuder/schleuder
-* https://git.codecoop.org/schleuder/schleuder-conf
+* https://0xacab.org/schleuder/schleuder
+* https://0xacab.org/schleuder/schleuder-web
+* https://0xacab.org/schleuder/schleuder-cli
 
 If a valid database is not found, `rake db:setup` is run inside the container to set-up a basic valid database.
 
-## Communication with `schleuder-api-daemon`
+## Communication with "schleuder-api-daemon"
 
-This image requires a `schleuder-api-daemon` running somewhere and accessible via `TCP/IP` -- one option is to run the [`schlocker3` docker image](https://git.occrp.org/libre/schlocker3/). You can configure the `schleuder-api-daemon` host with the `WEBSCHLOCKER_CONFIG_API_HOST` environment variable described below.
+This image requires a "schleuder-api-daemon" running somewhere and accessible via TCP/IP -- one option is to run the ["schlocker" docker image](https://0xacab.org/schleuder/schlocker). You can configure the "schleuder-api-daemon" host with the `WEBSCHLOCKER_CONFIG_API_HOST` environment variable described below.
 
 
 ## Running and testing
 
-You need `docker`, obviously. So first, [go and install it](https://docs.docker.com/engine/installation/). Then get `schleuderd` running. We'll assume you're [using the `schlocker3` docker image](https://git.occrp.org/libre/schlocker3/#running-and-testing) for this. Once you have `schlocker3` running, run `webschlocker3`:
+You need `docker`, obviously. So first, [go and install it](https://docs.docker.com/engine/installation/). Then get "schleuder-api-daemon" running. We'll assume you're [using the "schlocker" docker image](https://0xacab.org/schleuder/schlocker/#running-and-testing) for this. Once you have "schlocker" running, run "schlocker-web":
 
 ```
-$ git clone https://git.occrp.org/libre/webschlocker3.git
-$ docker build -t 'webschlocker3' webschlocker3/
-$ docker run --rm --name webschlocker-test --link schlocker-test -e WEBSCHLOCKER_CONFIG_API_HOST="schlocker-test" -e WEBSCHLOCKER_CONFIG_TLS_FINGERPRINT="fingerprint_from_schlocker_output" -e WEBSCHLOCKER_CONFIG_API_KEY="api_key_given_also_to_schlocker" webschlocker3
+$ git clone https://0xacab.org/schleuder/schlocker-web.git
+$ docker build -t 'schlocker-web' schlocker-web
+$ docker run --rm --name schlocker-web-test --link schlocker-test -e WEBSCHLOCKER_CONFIG_API_HOST="schlocker-test" -e WEBSCHLOCKER_CONFIG_TLS_FINGERPRINT="fingerprint_from_schlocker_output" -e WEBSCHLOCKER_CONFIG_API_KEY="api_key_given_also_to_schlocker" schlocker-web
 ```
 
-By default `schleuder-web` listens on port `3000` (you can change this by setting `$WEBSCHLOCKER_BIND_PORT` docker envvar) and will inform you about the IP address it is running on in the output.
+By default "schleuder-web" listens on port 3000 (you can change this by setting `$WEBSCHLOCKER_BIND_PORT` docker envvar) and will inform you about the IP address it is running on in the output.
 
-Once you have that, navigate your browser to `http://<IP-of-the-container>:3000/` and log-in with user `root@localhost`, password `slingit!`.
+Once you have that, navigate your browser to http://<IP-of-the-container>:3000/ and log-in with user `root@localhost`, password `slingit!`.
 
 ## Environment variables
 
  - `WEBSCHLOCKER_CONFIG_HOSTNAME` (default: container's hostname)
 
-The hostname `schleuder-web` will run under, used among others in confirmation links sent to users.
+The hostname "schleuder-web" will run under, used among others in confirmation links sent to users.
 
  - `WEBSCHLOCKER_BIND_ADDRESS` (default: `0.0.0.0`)
  - `WEBSCHLOCKER_BIND_PORT` (default: `3000`)
@@ -41,11 +42,11 @@ Hostname (or IP address) and port to bind to.
 
  - `WEBSCHLOCKER_CONFIG_API_HOST` (default: `localhost`)
 
-Host the `schleuderd` daemon can be reached at.
+Host the "schleuder-api-daemon" can be reached at.
 
  - `WEBSCHLOCKER_CONFIG_API_PORT` (default: `4443`)
 
-Port the `schleuderd` daemon can be reached at.
+Port the "schleuder-api-daemon" can be reached at.
  
  - `WEBSCHLOCKER_CONFIG_MAILER_FROM` (default: `noreply@$WEBSCHLOCKER_CONFIG_HOSTNAME`)
  
@@ -53,7 +54,7 @@ Sender address for all the e-mails originating from the web interface (i.e. conf
  
  - `WEBSCHLOCKER_CONFIG_DELIVERY_METHOD` (default: `smtp`)
  
-Delivery method to use for outgoing e-mail; `schleuder-web` uses [`ActionMailer`](http://api.rubyonrails.org/classes/ActionMailer/Base.html) to send mail.
+Delivery method to use for outgoing e-mail; "schleuder-web" uses [`ActionMailer`](http://api.rubyonrails.org/classes/ActionMailer/Base.html) to send mail.
  
  - `WEBSCHLOCKER_CONFIG_SENDMAIL_ARGUMENTS` (default: `-i`)
  
@@ -74,7 +75,7 @@ Secret used to verify encrypted cookies; can be changed at any time (change caus
 
 ### Database settings
 
-Separate databases are used by `schleuder3` and `schleuder-web`; these settings should thus be different from the ones used for [`schlocker3`](https://git.occrp.org/libre/schlocker3/).
+Separate databases are used by "schleuder" and "schleuder-web"; these settings should thus be different from the ones used for "[schlocker](https://git.occrp.org/libre/schlocker3/)".
 
  - `WEBSCHLOCKER_DB_ADAPTER` (default: `sqlite3`)
 
@@ -103,4 +104,4 @@ Database host (not used for `sqlite3`).
 
 ## TODO
 
- - handle more [`ActionMailer` config options](http://api.rubyonrails.org/classes/ActionMailer/Base.html)
\ No newline at end of file
+ - handle more [`ActionMailer` config options](http://api.rubyonrails.org/classes/ActionMailer/Base.html)